This JIGMOD is intended to connect a 3.3 V microcontroller to a CAN bus. The intended transceiver is a TI SN65HVD230.
- screw terminals, and/or a DB9 or RJ45 jack, for the CAN cable
- termination jumper
A CAN controller is still required on the microcontroller side (for example an ESP32). A Raspberry Pi or Arduino Uno would need a separate controller.
This is a prototype in development, available as a special order. The final circuit, connectors and pinout are still being decided.
Special order, ships in about 45 days.
